DIY Pedestal Table

Turn an old lamp and picture frame into a pedestal table. I absolutely loved how this project turned out! Step by step tutorial located here.

 Before

The little girl in the frame was kinda creepy :/

 During 

Before the antiquing glaze. Another sweet tutorial here.

 After!

You can personalize with fabric or paper. I used 2 pieces of paper (1. solid dark brown 2. doily looking, scrapbook, plastic sheet that was clear on some parts to see the brown paper)

Pictures on a Curtain Rod?

I LOVE

-using things for something other than what they're intended for! Got the idea from here. Also cute for a playroom to display kids art.
-IKEA! $15 for the wire and $5 for the clips

applique onesies

 Had enough of applique onesies? NEVER! Loved making these for my friend's baby shower :)




Ingredients:
- blank onesies
- fabric (for the tie & vest/suspenders)
- heat n bond
- scissors
- iron
- sewing machine + coordinating thread

First things first, wash and dry your fabric + onesies. Next, make some patterns. For mine I used paper; it took me a few tries to get the right sizes. I cut them out and tried them on the onesies.

Lay your patterns on the heat n bond to determine how much you'll need. Follow the directions and bond to the fabric. Trace your patterns on the back and cut them out. Iron them in place where desired.

Stitch around close to the edge of the tie and vest/suspenders. You can use a zig zag stitch if you want. I used a straight stitch (which I though was easier, because I still consider myself a beginner). Optional- add a few buttons to the vest.

Easy peasy! Let me know if you have any ?'s

{butterfly} note cards

I fell in love with these little {note cards} the moment I first saw them. Clean and Simple. Lucky for me, I have oodles of butterflies already punched out (thanks kids) so I was ready to sew them on that same afternoon....

Supplies you will need:

Patterned paper

Plain card stock for your "card"

Paper punches

Sewing machine, thread & scissors

Step 1. Go to town with your punches.... or give your kids something to do. It will keep them busy for awhile, punching and then picking up the shapes :)

Step 2. Cut plain card stock in to strips (3" x 6")

Step 3. Score down the middle for easy folding.

Step 4. Layer 3 of the butterflies in the middle of the "front side" of the card.

Step 5. Make sure your card is OPEN.... Sew straight down the center of the butterflies. I stitched about a 1/2" before and after the butterflies. I did not back stitch.

Step 6. Trim the threads and fold the butterflies in half... helping them fan out a bit away from the card.

Visit Little Birdie Secrets for more photos and their tutorial.

SO CUTE! We have already used a bunch for birthday cards.

Now I need to make more~

pots of moss

Spring has sprung! Made these MOSS POTS for a church dinner party last month. Went with a sophisticated "garden party" look. We used fresh white flowers and fruit from the gardens of many sisters. Put a little pot of moss at each place setting... thanks to Martha for the idea. Covered each pot with a glass, so it looked like a mini terrarium. Instead of using the pots for name cards, the tags read charity to go with the theme {Charity Never Faileth}. In case you were wondering, we had a salad & potato bar, served warm homemade rolls... AND enjoyed a slice of chocolate texas sheet cake covered with whip cream & chocolate shavings on top!

To make your own MOSS POTS, you will need:

1 1/2-inch terra-cotta pots

bag of floral sheet moss

twigs

print out name cards/tags

glue gun

Step 1. Pull off a bunch of moss.

Step 2. Fill the terra-cotta pot with moss.

Step 3. Shape the moss.

Step 4. Trim down twig.

Step 5. Insert twig in center.

Step 6. Glue the tag to twig.

This may be the finishing touch you need for your Easter dinner :)

I also planted {wheatgrass} the week before and it grew just in time!! Found the green and white shallow glass pots at the dollar store and the red wheat berries were only $0.89/lb in the bulk food section. This made PERFECT inexpensive spring decor!! It looked so fresh. I am ready to plant more for Easter....

Scrabble Pillows

It's about time for a new project!!! I am a little obsessed with these pillows :) They're actually covers; I was a little sick of a few of my pillows, so I made covers for them instead of throwing them out. And I am aware that it doesn't spell anything.. they stand for Scott + Lyndsey <3 <3 <3




They were really easy to make!

What I used
-fabric (cream canvas & black cotton)
-heat n bond (lite)
-iron
-scissors
-sewing machine (needle + corresponding thread)
-old pillow (or filling if you want to make a pillow)

Step 1
    Measure your pillow. Add an inch (this will be for the front side of the pillow). My pillow was 18.5x18.5 (so I cut my fabric 19.5x19.5). Then for back/envelope side, you're supposed to add 4in to 19.5 (23.5x19.5).. but I didn't have enough fabric to make that big of an envelope (but I made it work anyway!! Click here for an easy video tutorial that might explain it better than me :P

Here's what my pieces looked like cut out

Step 2
    Print out your letters. I found some free fonts here, and some other images here. Cut out your letter(s), place them on the heat n bond sheet and cut how much you'll need. Follow the directions for ironing onto your black fabric... Then place your letters face down and trace them. Cut out the letters, peel backing and pin where desired. Iron in place.

 Sew a straight stitch border close to the edge on your letter & number.

Step 3
    Fold and pin the edge on the long side of the smaller pieces (for the envelope back). You only need to do this to one side of the piece. See youtube tutorial mentioned above if this is confusing you :)
   

Sew

Step 4
    Place all your pieces right sides together. The back pieces will overlap a little to let you get your pillow in. Pin and sew 1/2in around all the edges. Don't forget to cut the corners when you're done sewing to make the corners look pretty :) Turn right side out and insert your pillow.

There you have it!! Had to post this pic of my cute Astro :P

Here were some other pics I found on the world wide web. SOOOO CUTEEEE!!! Let me know if you have any questions.

{teacup} pincushion

What you'll need:
- teacup
- spray paint (unless your teacup is already the color you want)
- fabric scrap (size of a dinner plate)
- needle + thread
- poly fil
- hot glue

Step 1. Find your teacup and spray paint it desired color. I found this one at the thrift store for $.75 :)

Step 2. Cut out your fabric (I had some left over from my tote :) I traced a dinner plate to get this size, but you'll want it 3-4 inches larger than your cup.

Step 3. Do a large running stitch about a 1/2 inch from the edge of the fabric. Then fill it with the poly fil. Tighten the thread and close off with a few stitches that go all the way through.

Step 4. Try in your puff before you put the glue in.. you might need to twist/fold some of the extra fabric that will be the bottom. Next part you'll have to be fast, unless you use another type of glue that gives you more working time. Put some hot glue in the bottom and sides of cup and place cushion where you want it. Hold until the glue cools a little. There you have it!

Cute and inexpensive gift idea for mother's day ;)

simple {reversible} tote bag

This tote was really fun and easy to make. This was my second sewing project since high school, so you know it's easy :P  Click here for the step by step tutorial.

I love that it's so customizable.. If you want it bigger, just cut bigger pieces. On the reversible side, I added a pocket.. I am always digging for my phone and chapstick :]

You could also add some embellishments if you'd like. I can't decide what to put on mine yet..

Easy Birthday Card

 You'll need:

-cards & envelopes (25 pack $5.49 @Michael's)
-glue stick
-scissors
-stamp ($1 @Michaels's)
-ink pad
-scrapbook paper

What I love about this is you can use up some of those paper scraps :) For added detail (if you have a sewing machine), sew a border!

 

Happy Valentine's Day!

photo + a bunch of kisses = Valentine's Day card!!

{lollipop tree}

I am SO happy this {RED} topiary tree is finished... started it five years ago.

Ran out of "seasonal" red berries, and

even moved twice since then. Picked it up again before Christmas 2009...

completed just in time for Valentine's Day 2011. (Seems to be the story of all my PROJECTS.) Inspired by Pottery Barn's holiday decor.

Just LOVE lollipop trees.

Topiary Tree Tutorial [w/out photos]:

SUPPLIES

+ styrofoam ball (I used 4")

+ red berry cluster Christmas floral spray (8 or more, different colors of red)

+ stick/branch (from yard)

+ floral foam (green)

+ clay pot

+ green leaf cluster

+ hot glue gun & glue sticks

STEP 1: Cut berries off the floral spray, leaving an inch or so of wire to stick into the foam ball.

STEP 2: Stick berries in foam, covering completely and overlapping some berries.

STEP 3: Add greenery sporadically. (The leaves I picked worked perfect for this project... pulling them off the stem left a hole between the 2 leaves. Place the berry wire through hole before putting it into the ball.)

STEP 4: Place the floral foam block(s) into the clay pot. Trimming foam down to size. Want it to fit snug. Hot glue together if needed.

STEP 5: Place the stick through the bottom of the styrofoam ball, leaving a space without berries. Push stick in an inch or so. Hot glue once in the "perfect" place.

STEP 6: Push other end of stick into the [clay pot] floral foam. Make sure your topiary tree stands straight/the way you want it... before hot gluing it in.

STEP 7: Cover the floral foam with the remaining green leaves. I think spanish moss would work too.

You're done! You could cover ball with just about ANYTHING. (Hot glue it in place... if it doesn't stick on its own.)

Lovely Art

This post should have been posted weeks ago, and I really have no excuse :P I hope everyone has a splendid Valentines Day tomorrow!! <3 <3 <3
The 3D art ideas came from Brassy Apple and the subway art is from eighteen25.